Quick question: Are you tired of your ring spinning around like it’s auditioning for a spot in the American Ballet Theatre? Because if so, this article is the solution to all your problems.
From using a ring noodle to resizing your sparkler, we’ve highlighted the best ways to solve this issue here.
What are you waiting for? Read on…
Why Is Your Ring Spinning?
1. It Could Be Too Big
If your ring has a tendency to moonwalk off your finger without any encouragement, it might be too big. This size discrepancy can also be highlighted by the presence of a gap between your ring and finger – If there is one, your stunner is definitely a size or two larger than it should be.
2.Your Ring Could Be Too Top Heavy
If your women’s engagement ring or favourite everyday sparkler comes with a centre stone or intricate detailing bigger than a Hollywood blockbuster and a band thinner than the plot of a romantic comedy, it’s destined to go for a spin.
3. Your Finger Could Keep Changing Sizes
Fun fact: Your digits can swell up to half a ring size during the day due to several factors ranging from physical activity to hydration and temperature. As such your ring will fit differently at different times of the day! And if you just so happen to choose your sparkler when your finger is bloated… Congratulations, you’ve earned yourself a one-way seat to spin town.
4. You Could Have Large Knuckles and Slender Fingers
Is your sparkler big enough to comfortably slide over your knuckle (the second joint on your finger) but too big for your finger? That’s probably the main cause behind your ring’s constant spinning! And while sizing down may seem like the ideal solution, it could make it really tough for you to slip your stunner over your knuckle.
We know, yikes!
Also Read: 5 Times LGBTQ+ Couples Flaunted Their Angara Rings With Pride
So, How Do You Keep Your Ring From Spinning on Your Finger?
Believe it or not, a spinning ring isn’t the end of the world and there are several solutions to this problem. Our top choices are as follows:
Home Remedies for Spinning Rings
1. Make Tape Your Best Friend
Picture this: You’re gearing up for a night out on the town and you slip on your favourite ring for women only to find it pirouetting around your finger like a ballet dancer with a mind of its own. What do you do? We suggest wrapping some sticky tape around the bottom part of the ring or cutting a small strip to fit the inside of your sparkler.
This makeshift fix creates a snugger fit, making it harder for your ring to engage in its impromptu breakdance routine.
Of course, if tape isn’t your style, you can experiment with other household items like string, floss, adhesive bandages or even an elastic band.
2. Use a Ring Noodle or Guard
When people typically ask us how to keep a ring from spinning without resizing it, our first response is to use a ring noodle or guard.
It’s a small, thin, clear device that can be slipped onto the bottom of your stunner and discreetly hold it in place without damaging it. Unlike other resizers, you can attach this guard to your sparkler after wearing it, thus saving yourself from the trouble of bypassing your large knuckles.
Plus, it’s made of medical grade plastic, so the only reaction you’ll get is from admirers, not allergies.
3. Flaunt an Invisible Ring Adjuster
Want to put an end to your everyday sparkler/wedding ring spinning woes more discreetly? The invisible ring adjuster is here to save the day. Similar to the ring noodle, however, this device secures itself onto only the inner part of your ring, providing a snug fit without being visible from the outer edge of the shank.
4. Rock a Ring Wrap
Constituting a tightly curled piece of plastic that can be wrapped around the bottom portion of your sparkler, a ring wrap is just what you need to close that annoying gap between your stunner and finger and stop your promise ring or any ring from spinning.
Just remember to change it periodically so that you can avoid the soap and gunk that may decide to join the party in the wrap’s grooves.
Also Read: 7 Gorgeous Rings You Can Buy For Yourself
Professional Solutions to Your Ring Spinning Problem
1. Add a Counter-Balance
If a top-heavy structure is your favourite sparkler’s/engagement ring’s primary reason for doing somersaults, then beefing up the metal at its base is a great way to keep your gemstone upright. Apart from this, you might also want to consider lowering your stone setting here.
Trust us, it’s the upgrade your stunner deserves!
And speaking of upgrades, did you know there are countless ways to revamp your ring? Read our article titled ‘Different Ways to Upgrade Your Engagement Ring‘ for ideas!
Did You Know?
A euro shank (type of ring band) is better equipped to support a ring with a top-heavy structure. This is mainly due to the thick, angular, flat or squarish bottom that exists on its outer edge. What’s more, this type of shank also features a perfectly round inner circle which makes wearing it feel almost exactly like wearing a regular ring. So, if you’re committed to buying a ring with a top-heavy structure, consider going for one with a euro shank to avoid any spinning problems in the future.
2. Ring Resizing Beads
If your ring is slightly loose, then resizing beads are probably the solution you’ve been looking for. Also known as ‘speed bumps,’ these beads are tiny metal balls that are attached to the inner part of the ring, providing friction and preventing your stunner from spinning. And while they’re usually very comfortable, if your fingers tend to swell, you may experience some discomfort.
3. Tapered Inserts
Less intrusive than ring beads, tapered inserts are adored for their softer shapes. They’re a great option for rings with a larger size difference.
Also Read: 9 Celeb-Approved Creative Ways To Style The Rings You Already Own
4. Permanent Inserts
Attached to the inner base of the ring, permanent inserts (which are caliper-shaped or look like little hinges) play the role of springs, giving way so that the ring can easily be slipped on and then bouncing back to their original shape, preventing any unwanted ring twirls.
Side Note: Because they’re created from precious metal, these inserts aren’t the most flexible of the bunch. Plus, they’re likely to hide that sweet engraving you’re so proud of.
5. Ring Resizing
Want to know how to permanently keep a ring from turning on your finger? Resizing it is the way to go!
Do note that if your knuckles are large, resizing might not be the best choice. Also, some rings, like those with tension or full eternity settings, cannot be resized!
Don’t know what your ring size is? Download our ring sizer pdf now and don’t forget to cheque out our ring size guide for a step-by-step plan on how to measure your correct size.
6. Sizing Bar
Also known as the fold-over device, the sizing bar is like the adjustable waistband of the ring world. It’s a U-shaped bar placed across the base of your ring, allowing you to go down multiple ring sizes without a permanent commitment.
Also Read: Black Friday Ring Sale 2024: 7 Rings You’ll Love
7. Hinged Shank
If you have large knuckles and dainty fingers, consider asking your jeweller to convert your regular ring shank into a hinged shank.
As indicated by its name, this ingenious design has a tiny hinge and latch which can only be opened with a tool that was created specifically for it. This allows you to avoid awkwardly sliding your ring on and prevents your favourite stunner or wedding band from spinning.
Want to shop for a promise ring but don’t know where to get it? Cheque out our collection! From subtle beauties to extravagant stunners, we’ve got several options designed to make your darling’s heart swoon.
And if buying a wedding ring online is at the top of your to-do list, then our collection is definitely something you should browse. Adorned with beautiful gemstones ranging from diamonds to sapphires, you’re sure to find the sparkler of your dreams here.
Frequently Asked Questions
Q1. How do you stop a ring from spinning?
If you’re looking for a quick fix, a tape, ring noodle, invisible ring adjuster or ring wrap should do the trick. On the other hand, if you want a more permanent solution, we highly recommend either resizing your ring or opting for devices like resizing beads, for instance.
Q2. Unsure about your ring size?
Take a look at our ring size chart to find the perfect fit.
